Log Home Restoration Teton Village: 4 Jobs, Honest Prices
Log home restoration in Teton Village happens on a short calendar and in front of an audience. Homes at the base of Jackson Hole Mountain Resort take heavy snow load, long shoulder seasons and constant guest traffic, and most of them are second homes or rentals managed on someone else’s behalf.
Log Care schedules Village work around the season rather than through it. We assess on site, quote in writing, and coordinate with owners and property managers so blasting and staining land in the window when nobody is trying to check in.
What Teton Village does to a log home
Snow load and long snow contact
Snow sits against walls and decks here longer than almost anywhere else in the valley. Anywhere it banks up, the bottom courses stay wet for months, and that is where rot starts.
A very short working season
At Village elevation the window for blasting, staining and chinking is narrower than it is in town. Projects get booked ahead or they wait a year.
Rental traffic and wear
Decks, railings and entry logs on a rented property take far more traffic than a private home. They wear through the finish first and are usually the first thing that needs attention.
Managed, absentee ownership
When nobody with authority is standing in front of the wall, small problems compound. A written annual assessment gives an owner or manager something to act on instead of a surprise.
The four jobs a Teton Village log home needs
Media blasting · $3–$6 per sq ft
Strips failed stain, paint, mildew and gray UV-damaged fiber back to bare, bondable wood using recycled crushed glass, corn cob or walnut shell. New finish will not bond to gray fiber. Log home media blasting.
Log rot repair · $250 to $5,500
Priced by method, decided by a probe: borate treatment, epoxy consolidation, a Dutchman patch, half-log facing or a full log. Water is almost always the cause, so we fix the water too. Log home repair.
Staining and sealing · $1.40–$10 per sq ft
A breathable, penetrating stain goes on bare, sound wood within days of the blast, before UV can gray it again. Cost tracks prep, not paint. Log home staining.
Chinking and caulking · $12–$22 per linear ft
Failed material removed, joint prepped, backer rod installed, new chinking applied over a finished surface so it bonds. Done right it lasts twenty years or more. Chinking and caulking.
We also handle thermal imaging, log carpentry, house painting, pressure washing and window washing. Everything is on the services page.
Teton Village and the towns around it
Teton Village sits inside our Jackson Hole service area, along with Wilson, Jackson, Kelly and Alta. We also work Teton Valley and Star Valley. Every town is listed on the service areas page.
Log home restoration questions from Teton Village owners
How much does log home restoration cost in Teton Village?
Media blasting runs $3 to $6 per square foot of log surface, staining $1.40 to $10 per square foot depending on prep, a full re-chink $12 to $22 per linear foot, and rot repair from a $250 patch to $5,500 for a jacked sill log. Most whole-house projects land between $15,000 and $60,000. See log home restoration cost.
Can you work around a rental calendar?
Yes. Tell us the blackout dates when you book the assessment and we build the schedule around them. The constraint we cannot move is weather — blasting and staining need temperature and dry conditions, and that window is short up here.
Do you work with property managers?
Yes. We can send the assessment and the written scope to a manager, an owner, or both. Approval still comes from whoever holds it.
How often should a Teton Village log home be restained?
South and west walls every three to five years, north and east walls every five to eight. The quickest test is whether water still beads on the wall — when it soaks in, the repellent is spent. Blasting back to bare wood is typically needed every seven to ten years.