Log Home Restoration in Freedom, WY: 4 Jobs, Honest Prices
Log home restoration in Freedom spans a state line. The town sits on the Wyoming-Idaho border at the west edge of Star Valley, and we work both sides of it — the crew comes down from Victor, Idaho, so neither side is a special trip.
Log Care has restored log homes and outbuildings in this valley since 2008. Assessments in Freedom are free and done on site.
What Freedom does to a log home
Open west-side exposure
Sitting on the west edge of the valley means long afternoon sun and wind with little to break it. West elevations here run well ahead of the rest of the building.
Snow contact at the base
Where snow banks against a wall it keeps the bottom courses wet for months. Sill logs and the lowest courses are the first thing we probe.
Ranch buildings that get overlooked
Barns, shops and sheds fail before the house because nobody inspects them. They are also cheap to maintain when they are folded into one scope with the main building.
Two states, one crew
Property lines here cross a border. It makes no difference to how we schedule or price the work.
The four jobs a Freedom log home needs
Media blasting · $3–$6 per sq ft
Strips failed stain, paint, mildew and gray UV-damaged fiber back to bare, bondable wood using recycled crushed glass, corn cob or walnut shell. New finish will not bond to gray fiber. Log home media blasting.
Log rot repair · $250 to $5,500
Priced by method, decided by a probe: borate treatment, epoxy consolidation, a Dutchman patch, half-log facing or a full log. Water is almost always the cause, so we fix the water too. Log home repair.
Staining and sealing · $1.40–$10 per sq ft
A breathable, penetrating stain goes on bare, sound wood within days of the blast, before UV can gray it again. Cost tracks prep, not paint. Log home staining.
Chinking and caulking · $12–$22 per linear ft
Failed material removed, joint prepped, backer rod installed, new chinking applied over a finished surface so it bonds. Done right it lasts twenty years or more. Chinking and caulking.
We also handle thermal imaging, log carpentry, house painting, pressure washing and window washing. Everything is on the services page.
Freedom and the towns around it
Freedom is part of our Star Valley service area, along with Etna, Thayne, Afton and Alpine. We work north into Jackson Hole and west over the pass into Teton Valley. Every town is listed on the service areas page.
Log home restoration questions from Freedom owners
How much does log home restoration cost in Freedom?
Media blasting runs $3 to $6 per square foot of log surface, staining $1.40 to $10 per square foot depending on prep, a full re-chink $12 to $22 per linear foot, and rot repair from a $250 patch to $5,500 for a jacked sill log. Most whole-house projects land between $15,000 and $60,000. See log home restoration cost.
Do you work on the Idaho side too?
Yes. Our shop is in Victor, Idaho and we work both states every week. The border does not change scheduling or pricing.
Can the barn and the house be quoted together?
Yes, and they should be. One mobilization covering every log structure on the property is meaningfully cheaper than separate visits.
How often should a Freedom log home be restained?
South and west walls every three to five years, north and east walls every five to eight. The quickest test is whether water still beads on the wall — when it soaks in, the repellent is spent. Blasting back to bare wood is typically needed every seven to ten years.