Log Home Restoration in Pinedale, WY: 4 Jobs, Real Prices
Log home restoration in Pinedale is cold-weather work. Sitting at the foot of the Wind River Range, Pinedale has some of the hardest winters in the state, and sustained deep cold does specific, predictable damage to a log wall.
Log Care has restored log homes across western Wyoming since 2008. Assessments in Pinedale are free and done on site.
What Pinedale does to a log home
Sustained deep cold
Prolonged freezing drives whatever water is in a check or joint deeper into the log and expands it. Every winter widens what the last one opened.
Wind off the range
Wind coming out of the Winds drives rain and snow into joints on exposed elevations and scours the finish off south and west walls.
High-altitude UV
Elevation means more UV. Sunny elevations run through a finish faster here than most owners are expecting, and dark stains fastest of all.
Chinking that has to move
Big temperature swings mean logs move. Chinking has to flex with them or it cracks and pulls away from the log, and once it does, water is inside the wall.
The four jobs a Pinedale log home needs
Media blasting · $3–$6 per sq ft
Strips failed stain, paint, mildew and gray UV-damaged fiber back to bare, bondable wood using recycled crushed glass, corn cob or walnut shell. New finish will not bond to gray fiber. Log home media blasting.
Log rot repair · $250 to $5,500
Priced by method, decided by a probe: borate treatment, epoxy consolidation, a Dutchman patch, half-log facing or a full log. Water is almost always the cause, so we fix the water too. Log home repair.
Staining and sealing · $1.40–$10 per sq ft
A breathable, penetrating stain goes on bare, sound wood within days of the blast, before UV can gray it again. Cost tracks prep, not paint. Log home staining.
Chinking and caulking · $12–$22 per linear ft
Failed material removed, joint prepped, backer rod installed, new chinking applied over a finished surface so it bonds. Done right it lasts twenty years or more. Chinking and caulking.
We also handle thermal imaging, log carpentry, house painting, pressure washing and window washing. Everything is on the services page.
Pinedale and the towns around it
Pinedale is served with Cora, Bondurant, Hoback Ranches and our Jackson Hole territory. Every town is on the service areas page.
Log home restoration questions from Pinedale owners
How much does log home restoration cost in Pinedale?
Media blasting runs $3 to $6 per square foot of log surface, staining $1.40 to $10 per square foot depending on prep, a full re-chink $12 to $22 per linear foot, and rot repair from a $250 patch to $5,500 for a jacked sill log. Most whole-house projects land between $15,000 and $60,000. See log home restoration cost.
My chinking keeps cracking. Why?
Either the wrong material or the wrong installation. Chinking has to be elastomeric so it stretches as the log moves through the temperature swings you get here, and it has to be installed over backer rod with two-point adhesion so it can flex. Done correctly it lasts twenty years or more. See chinking and caulking.
Is the working season shorter here?
Yes. Blasting and staining need temperature and dry conditions, and Pinedale gives you less of both than the valley floor. Assessments booked over the winter are what get a project into the working season.
How often should a Pinedale log home be restained?
South and west walls every three to five years, north and east walls every five to eight. The quickest test is whether water still beads on the wall — when it soaks in, the repellent is spent. Blasting back to bare wood is typically needed every seven to ten years.