Log Home Restoration in Wilson, WY: 4 Jobs, Honest Prices
Log home restoration in Wilson is a different problem than restoration out on the valley floor. Wilson sits under cottonwoods and conifers along Fish Creek at the foot of Teton Pass, and that tree cover cuts the UV load on a wall but keeps it wet far longer after every storm.
Most of the log homes we look at here are high-value properties whose owners are not in town year-round. That is the case Log Care is built for: we assess on site, put the scope in writing, and you approve it from wherever you are. We have worked this side of the valley since 2008 and the shop is thirty minutes over the pass in Victor.
What Wilson does to a log home
Shade keeps walls wet
Tree cover slows drying after rain and snowmelt. A wall that stays damp longer grows mildew sooner and gives decay fungi the moisture they need. On shaded Wilson lots we check the north and east elevations as carefully as the sunny ones.
Mildew and organic staining
Overhanging limbs drop needles, sap and organic debris onto log walls and decks. That is not a finish failure, but it feeds one, and a wash and brighten is often all a Wilson home needs before a maintenance coat.
Snowmelt off the pass
Wilson gets the runoff. Where a roof dumps onto a wall or a deck with no gutter, the bottom courses stay wet through spring. Fixing the water is always cheaper than replacing the log.
Absentee ownership
Finish failure is gradual, and nobody sees it if nobody is standing in front of the wall. An annual walk-around catches a wall that needs a maintenance coat before it needs a blast, and that difference is thousands of dollars.
The four jobs a Wilson log home needs
Media blasting · $3–$6 per sq ft
Strips failed stain, paint, mildew and gray UV-damaged fiber back to bare, bondable wood using recycled crushed glass, corn cob or walnut shell. New finish will not bond to gray fiber. Log home media blasting.
Log rot repair · $250 to $5,500
Priced by method, decided by a probe: borate treatment, epoxy consolidation, a Dutchman patch, half-log facing or a full log. Water is almost always the cause, so we fix the water too. Log home repair.
Staining and sealing · $1.40–$10 per sq ft
A breathable, penetrating stain goes on bare, sound wood within days of the blast, before UV can gray it again. Cost tracks prep, not paint. Log home staining.
Chinking and caulking · $12–$22 per linear ft
Failed material removed, joint prepped, backer rod installed, new chinking applied over a finished surface so it bonds. Done right it lasts twenty years or more. Chinking and caulking.
We also handle thermal imaging, log carpentry, house painting, pressure washing and window washing. Everything is on the services page.
Wilson and the towns around it
Wilson sits inside our Jackson Hole service area, along with Teton Village, Kelly, Moran, South Park and Rafter J Ranch. We also work Teton Valley and Star Valley. Every town is listed on the service areas page.
Log home restoration questions from Wilson owners
How much does log home restoration cost in Wilson?
Media blasting runs $3 to $6 per square foot of log surface, staining $1.40 to $10 per square foot depending on prep, a full re-chink $12 to $22 per linear foot, and rot repair from a $250 patch to $5,500 for a jacked sill log. Most whole-house projects land between $15,000 and $60,000. See log home restoration cost.
My home is under trees. Does that mean less maintenance?
Less UV, more moisture. Shaded walls hold their color longer but stay wet after storms, so mildew and decay become the bigger risk. It usually shifts the work from staining toward washing, brightening and watching the bottom courses, not away from maintenance altogether.
Can you handle the project while I am out of town?
Yes. That is most of what we do here. We assess on site, send a written scope and price, and keep you posted through the job. Nothing is priced from a photo, and nothing starts without your approval.
How often should a Wilson log home be restained?
South and west walls every three to five years, north and east walls every five to eight. The quickest test is whether water still beads on the wall — when it soaks in, the repellent is spent. Blasting back to bare wood is typically needed every seven to ten years.